User`s guide

Motherboard: features & upgrades
5/16 FT1200 HANDBOOK
4. Hold the DIMM by the edges; remove it from its
antistatic package.
5. Make sure the clips at either end of the socket are
pushed away from the socket.
6. Position the DIMM above the socket. Align the two
small notches in the bottom edge of the DIMM with
the keys in the socket.
7. Insert the bottom edge of the DIMM into the socket.
8. When the DIMM is seated, press down on the top edge
of the DIMM until the retaining clips at the ends of
the socket snap into place. Make sure the clips are
firmly in place.
9. Replace the computer cover.
How to Remove Memory
1. Observe the precautions in Safety and Regulatory
Notices.
2. Turn off the computer, disconnect the computer’s
power cord, and disconnect all external peripherals.
3. Remove the computer cover and locate the DIMM
sockets.
4. Gently spread the retaining clips at each end of the
socket. The DIMM pops out of the socket.
5. Hold the DIMM by the edges, lift it away from the
socket, and store it in an antistatic package.
How to Replace the Battery
When your computer is turned off, a lithium battery keeps
the time-of-day clock and the values in CMOS RAM
current.
The battery should last about seven years. Replace the
battery only with a direct equivalent and ensure the correct
polarity.