User`s guide
Motherboard: features & upgrades
FT1200 HANDBOOK 5/11
OM06308
C
A
B
Installing the Termination Card
4. Slide the termination card (A) into the retention
mechanism (C). Ensure that the alignment notch (B)
in the termination card fits over the key in the
application processor Slot 1 connector.
5. Press down firmly on the termination card until it is
seated in the Slot 1 connector and the latches on the
termination card lock into place.
To Install a Second Processor
To install the second, or application processor, you must
ensure that the second processor is identical to the first
processor, (see the warnings and guidelines on page 6 of this
chapter) if it is:
1. Observe the precautions in Safety and Regulatory
Notices.