User`s guide

Motherboard: features & upgrades
5/10 FT1200 HANDBOOK
OM06312
A
Removing the Termination Card
4. Press the latches on the termination card (A) inward to
release it from the retention mechanism.
5. Hold the termination card by its top edge and carefully
rock it back and forth until the edge connector pulls
free from the Slot 1 connector.
To Install the Termination Card
If you remove the application processor you need to install
the termination card before you can turn the computer back
on:
1. Observe the precautions in Safety and Regulatory
Notices.
2. Turn off the computer, disconnect the computer’s
power cord, and disconnect all external peripherals.
3. Remove any peripherals that block access to the
application processor Slot 1 connector.