User`s guide

Welcome
1/4 FT1200 HANDBOOK
Use the P
OWER
button to turn on the computer and change power
modes. This switch can be secured by closing and locking the front
door. this will also prevent unauthorised access to the removable
media drives.
There is an option available for intrusion detection in the event of
the caselock being opened. This can be monitored via the network
from a supervisor’s PC.
Removing panels
For normal access to the interior of the system unit, only the right
side panel, and possibly the top panel, need to be removed. The left
side panel must be removed in order to install additional removable
media or hard disk drives in the forward drive bay.
WARNING
Never carry out any work inside the computer with AC power applied.
Always shut down the computer and unplug all power cords before
removing the top cover. Take effective anti-static precautions while the
covers are off, as explained in the Safety & Regulatory Notices at the
start of this manual.
Right side panel
1. Shut down the computer and turn off the monitor.
2. If your AC power outlets have switches, set them to their off
positions.
3. Unplug all power cords from the rear of the system unit.
4. Remove the panel’s two fixing screws.
5. Turn the caselock key to the unlocked position.