User`s guide

Expansion cards
4/6 FT1200 OWNER’S HANDBOOK
1
10101
2
1
3
2
1 Full PCI 3 Full ISA
2 Full PCI/ISA shared slot
5. If the card you are installing is configured by the means of
jumpers or switches, check that it is correctly configured before
proceeding.
NoteNote
If the card uses the video feature connector (VFC) on the motherboard,
or any separately installed video board, you may need to connect this
before
you install the card.
6. Position the expansion card alongside the slot in which you
wish to install it. If it is a full length card, align the end with
the slot in the rear of the fan assembly.
◊
Note that PCI cards have their components on the
opposite
side
to ISA cards.