User's Manual Part 1

9361 Home Cell V2 - Getting Started Guide

Step 1: Insert the SIM card (optional)

To improve coverage the following should be avoided

Installing near other radio transmitters

Installing near metallic devices

Installing near a window

Step 2: Find a central location in your home or office to install the device

Installing the Alcatel-Lucent 9361 Home Cell V2 is simple and can be done in around 10

minutes. The following instructions will guide you through the Quick Setup

process.

If your mobile operator provided a SIM card to use with the 9361 Home Cell V2, make

sure the 9361 Home Cell V2 is switched off and then insert the SIM card into the SIM

card slot on the side as shown next. The end with the cut-off corner goes in first with

the cut-off corner pointing down.

QUICK SETUP

The Alcatel-Lucent 9361 Home Cell V2 emits a radio signal similar to a Wi-fi router.

The quality of the coverage you will experience depends on where the device is located

and it should be placed:

- in a central area of your home

- as high as possible; on top of tall furniture, shelves, cabinets, wall mounts, etc.

The GPS antenna should be positioned horizontally for best GPS reception. The GPS

antenna must have a clear view of the sky.`

Painting the antenna as this impairs or disables signal reception

Pulling the cord when installing as this will cause a short or snap the wires