User Manual

Step 6: Broadband Connectivity
14
After approximately two minutes (for initial installation this may take up to 90 minutes
if it is the first time you turn on), the 9361 Home Cell V2 connectivity and GPS
indicators will begin to blink.
If the connectivity status indicator is off, go to the troubleshooting section of this guide
for help.
Step 7: Automatic Software Update:
After the device establishes a broadband connection to your Internet Service Provider
(ISP), the 9361 Home Cell V2 automatically updates its software.
This process “takes” about 15 minutes and the connectivity status indicator blinks.
After the device retrieves its software update package, it reboots automatically.
During reboot, the power indicator is on.
Step 8: Auto-configuration:
After rebooting, the 9361 Home Cell V2 automatically configures itself with the
information you have provided to your ISP and mobile phone operator regarding
phones or devices that are allowed to connect to your Femtozone service.
The connectivity status indicator blinks and remains on when the auto configura-
tion is complete.
When the device is ready to be used, the connectivity status indicator is ON.
You are now ready to make your first call using your 9361 Home Cell V2.
QUICK SETUP