User Manual

9361 Home Cell V2 - Getting Started Guide
Step 4: Connect the Ethernet cable:
Step 5: Connect the External Power Supply:
13
Connect the yellow Ethernet cable to an available Ethernet port on your DSL/Cable
router.
Connect the AC power adaptor cord to an available power socket.
Switch on the 9361 Home Cell V2. After a few seconds the power status indicator
lights up and the Ethernet port status indicators on both the 9361 Home Cell V2 and
the broadband connection should light up green (flash green). If this does not happen,
go to the troubleshooting section of this guide for help.
QUICK SETUP