User's Manual

9362 Enterprise Cell – Getting Started Guide
5
QUICK SETUP
1. Find a suitable location
To get the best results from
the Enterprise Cell it should
be placed high up and as
centrally as possible, since it
emits a radio signal similar to
a Wi-Fi router.
Avoid placing it near metallic
objects, windows or other
radio transmitters.
2. Install unit
The unit can stand on a flat
surface or be mounted on a
wall or ceiling
3. Connect Ethernet cable
Plug one end of the included
Ethernet cable into a port on
your router. Plug the other
end of the Ethernet cable into
the Router port of the
Enterprise Cell.
4. Connect power cable
Connect one end of the power
adaptor into a power socket
and the other into the
Enterprise Cell. The unit
should start up automatically
and begin the auto-
configuration process.
5. Auto-configuration
The auto-configuration
process takes about 15
minutes and involves the
Enterprise Cell connecting to
your Internet Service
Provider, updating its software
and rebooting. During this
time the Internet icon will
be white and pulsing. When
the Internet icon and the
Service icon are steady and
white the process is complete.