User's Manual

Chapter 6 Home Networking
B222s User’s Guide
71
6.2 The LAN Setup Screen
Click N et w ork Set t ing > Hom e N e tw or k ing t o open t he LAN Se t up screen. Use this screen to
set t he Local Area Networ k I P address and subnet m ask of your LTE Device and configure t he DNS
server inform ation t hat t he LTE Device sends t o t he DHCP client devices on t he LAN.
Figure 36 Net work Set ting > Hom e Networking > LAN Set up
The following t able describes t he fields in t his screen.
Table 19 Network Sett ing > Hom e Networking > LAN Setup
LABEL DESCRIPTION
LAN I P Set up
I P Address Ent er the LAN I P address you want t o assign t o your LTE Device in dot t ed decim al
notat ion, for exam ple, 192.168.1.1 (factor y default ) .
I P Subnet Mask Type t he subnet m ask of your net work in dot ted decim al notat ion, for exam ple
255.255.255.0 (fact ory default ) . Your LTE Device autom at ically com put es t he subnet
m ask based on t he I P address you ent er, so do not change this field unless you are
instr ucted to do so.
DHCP Server St at e
DHCP Select Enable t o have your LTE Device assign I P addresses, an I P default gateway and
DNS server s t o LAN com put ers and other devices t hat are DHCP clients.
I f you select Disa ble, you need t o m anually configure t he I P addresses of t he
com puter s and ot her devices on your LAN.
When DHCP is used, the follow ing fields need to be set .
I P Addressing Values
I P Pool St art ing
Address
This field specifies the fir st of t he cont iguous addresses in t he I P address pool.
Pool Size This field specifies t he size, or count of t he I P address pool.
DNS Values