User's Manual

Chapter 5 Wireless
B222s User’s Guide
55
5.5 The WMM Screen
Use t his screen t o enable or disable Wi- Fi MultiMedia ( WMM) wireless networks for m ult im edia
applications.
Regist er Ent er t he PI N of t he device t hat y ou are set t ing up a WPS connect ion wit h and
click Re gist e r t o aut hent icat e and add the wireless device t o your w ireless
net work.
You can find t he PI N either on t he out side of t he device, or by checking t he
device’s set t ings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the LTE Device.
WPS Configurat ion Sum mary
AP PI N The PI N of the LTE Device is shown here. Enter this PI N in t he configuration
ut ility of t he device you want t o connect t o using WPS.
The PI N is not necessary when you use WPS push- but t on m et hod.
Click t he Gene r at e N ew PI N but t on t o have the LTE Device create a new PI N.
St at us This displays Configure d when the LTE Device has connect ed t o a wireless
net work using WPS or Enable W PS is select ed and wireless or w ireless securit y
set t ings have been changed. The current wireless and wireless securit y set t ings
also appear in t he screen.
This displays N ot Con figur e d w hen t here is no wireless or wireless secur ity
changes on t he LTE Device or you click Re le a se Configur a t ion t o rem ove t he
configured wireless and wir eless securit y sett ings.
Release
Configuration
This but ton is available when t he WPS stat us is Con figu re d.
Click t his but t on t o rem ove all configured wireless and wir eless securit y set tings
for WPS connect ions on the LTE Device.
802.11 Mode This is t he 802.11 m ode used. Only com pliant WLAN devices can associate wit h
the LTE Device.
SSI D This is t he nam e of t he wireless net work .
Securit y This is t he t ype of wireless securit y em ployed by t he net work.
Apply Click Apply t o save your changes.
Table 14 Network Sett ing > Wireless > WPS ( cont inued)
LABEL DESCRIPTION