User's Manual

Chapter 5 Wireless

B222s User’s Guide

Click N e t w ork Set ting > W irele ss > W PS. The following screen displays. Select En a ble and click

Apply t o act ivat e t he WPS funct ion. Then you can configure t he WPS sett ings in t his screen.

Figure 27 Net work Set ting > Wireless > WPS

The following t able describes t he labels in t his screen.

Table 14 Network Sett ing > Wireless > WPS

LABEL DESCRIPTION

Enable WPS Select En able t o act ivat e WPS on t he LTE Device.

Add a new device wit h WPS Met hod

Method 1 PBC Use this section t o set up a WPS wireless netw ork using Push But ton

Configuration ( PBC).

WPS Click this but t on t o add anot her WPS- enabled wir eless device (within wir eless

range of t he LTE Device) to your wireless network . This but t on m ay either be a

physical but t on on t he out side of device, or a m enu but t on sim ilar t o the W PS

but t on on this screen.

Note: You must press the other wireless device’s WPS button within two minutes

of pressing this button.

Method 2 PI N Use t his sect ion to set up a WPS wireless network by ent ering t he PI N (Personal

I dent ificat ion Num ber) of t he client int o t he LTE Device.