User's Manual

Chapter 1 Configuration 9
1.6 LAN Configuration
Click Red Local to configure the Adaptador Wifi+ Dual’s LAN network settings.
1 The DHCP feature enabled (ACTIVADO) by default to assign IP addresses and provide subnet mask,
gateway, and DNS server information to LAN devices. You can configure the IP range. If you want to
disable it, select DESACTIVADO.
2 Enter the Adaptado
r Wifi+ Dual’s LAN IP address (Red Local). Use the Chequea Direccion IP válida
button it check if the IP address is valid.
3 Enter the
subnet mask in Máscara de subred.
4 Specify a default
gateway (Puerta de enlace predeterminada) if you disable DHCP.
5 Us
e Direccion IP inicio rango and Direccion IP fin rango to configure the range of IP addresses to
give to LAN DHCP clients.
6 C
lick Aplicar Cambios to save and apply your settings.
1.7 Firmware Upgrade
Click Actualizaciones Firmware to upload firmware to the Adaptador Wifi+ Dual.
•Use Selecciona
el archivo de actualización en tu PC to upload firmware from your computer.
Choose the firmware’s file path and click Actualizar.