User's Manual Part 2

Chapter 12 Maintenance
BM2022w User’s Guide
201
12.22 Reboot
Use this screen to perform a software restart of the WiMAX Device. You may log in again within a
few minutes of using the reboot button.
Click Maintenance > Reboot to open this screen as shown next.
Figure 127 Reboot Screen
This screen contains the following fields:
CROM Version This field displays the CROM version number.
Firmware Version This field displays the current version of the firmware inside the device.
Firmware Date This field displays the date the firmware version was created.
Bootloader
Version
This field displays the bootloader version.
Table 102 About (continued)
LABEL DESCRIPTION
Table 103 Reboot
LABEL DESCRIPTION
Reboot Click this button to have the device perform a software restart. The Power LED
blinks as it restarts and the shines steadily if the restart is successful.
Note: Wait one minute before logging back into the BM2022w after a restart.