User's Manual Part 2

Chapter 12 Maintenance
BM2022w User’s Guide
198
12.17 Log Setting
Use this screen to configure which type of events on the WiMAX Device are logged.
Click Maintenance > LOG > Log Setting to open this screen as shown next.
Figure 122 Log Setting Screen
This screen contains the following fields:
12.18 Log Display
Use this screen to view the log messages of the WiMAX Device.
Table 98 Log Setting
LABEL DESCRIPTION
Enable Log Select this to have the BM2022w log network activity according to the selected
Log Level.
Log Level Select the type of logs to record.
Enable Remote
Log
Select this to allow logs to be recorded and stored on a remote logs server.
Remote Log Host Enter the remote log host IP address if Enable Remote Log is selected.
Remote Log Port Enter the remote log host port if Enable Remote Log is selected.