User's Manual Part 2

Chapter 12 Maintenance
BM2022w User’s Guide
188
Click Maintenance > Remote MGMT > Telnet to open this screen as shown next.
Figure 109 Telnet Screen
This screen contains the following fields:
12.5 SSH
Use this screen to allow remote access to the WiMAX Device from a network connection over SSH.
Click Maintenance > Remote MGMT > SSH to open this screen as shown next.
Figure 110 SSH Screen
This screen contains the following fields:
Table 85 Telnet
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the BM2022w. The
computer must use the same port number.
Allow Connection
from WAN
Select this to allow connections using this service that originate on the WAN.
Allow Connection
from LAN
Select this to allow connection using this service that originate on the LAN.
Table 86 SSH
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the BM2022w. The
computer must use the same port number.
Allow Connection
from WAN
Select this to allow connections using this service that originate on the WAN.
Allow Connection
from LAN
Select this to allow connection using this service that originate on the LAN.