User's Manual Part 1

Chapter 4 Tutorials

BM2022w User’s Guide

1 Configure the Link Type, PVID and Tag/Untag settings for the interfaces as below by clicking

each row. Then press OK.

2 Next, configure the Name, VID and Ports for the Filter Setting. The BM2022w will tag packets it

receives on each interface so that they are recognized in VLAN 5. Tagged packets will be untagged

when they are forwarded out of each interface since the devices attached to these interfaces do not

support VLAN tagged packets.

4.11.2 Scenario 2

In this scenario, PC A and PC C are on VLAN 5, while PC B and PC D are on VLAN 10. PC A and PC

B are connected to interface LAN1 through VLAN supporting switch S1. PC C is connected to

interface WiMAX and interface IAD for managing the BM2022w, through VLAN supporting switch

S2. PC D is connected to interface WiMAX through VLAN supporting switch S2.