User's Manual Part 1

Chapter 4 Tutorials
BM2022w User’s Guide
52
1 Open the Maintenance > Remote MGMT > HTTP screen.
2 Select Enable in both HTTP Server and HTTPS Server sections and leave the Port Number
settings as “80” and “443”.
3 Select Allow Connection from WAN. This allows remote management connections not only from
the local network but also the WAN network (Internet).
4 Click Save.
4.11 VLAN Configuration Examples
This section shows VLAN configuration scenarios.
See
Section 7.20 on page 122 if you need more information about VLAN.
Before enabling VLANs you will need to change the BM2022w to bridge mode.