User's Manual Part 1

Chapter 4 Tutorials
BM2022w User’s Guide
51
To configure a static route to route traffic from N1 to N2:
1 Click Network Setting > Route > Static Route.
2 Click Add to create a new route.
3 Configure the Edit Static Route screen using the following settings:
3a Enter 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
3b Enter 192.168.1.253 (R’s IP address on N1) in the IP Address field under Next Hop.
3a Click Save.
Now computer B should be able to receive traffic from computer A. You may need to additionally
configure R’s firewall settings to accept specific traffic to pass through.
4.10 Remotely Managing Your BM2022w
The remote management feature allows you to log into the device through the Internet.
Goal: Set up the BM2022w to allow management requests from the WAN (Internet).
See Also:
Section 12.3 on page 187.
R’s IP address on N2 192.168.10.2
B 192.168.10.33
Table 11 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS