User's Manual Part 1

Chapter 4 Tutorials
BM2022w User’s Guide
41
4 Log into the Web Configurator and open the Network Setting > LAN > DHCP screen.
5 Select Server for the DHCP mode, then enter 192.168.100.10 and 192.168.100.30 as your DHCP
starting and ending IP addresses.
6 Leave the other settings as their defaults and click Save.
7 Next, go to the Network Setting > WAN screen and select NAT in the Operation Mode field.
Click Save.
8 Connect your computers to the BM2022w’s Ethernet ports and you’re all set!
Note: You may need to configure the computers on your LAN to automatically obtain IP
addresses. For information on how to do this, see
Appendix B on page 219.
Once your network is configured and hooked up, you will want to connect it to the Internet next. To
do this, just run the Internet Connection Wizard (Chapter 3 on page 27), which walks you
through the process.