User's Manual Part 1

Chapter 3 Setup Wizard
BM2022w User’s Guide
33
3.1.5 VoIP Settings
The VoIP Settings screen allows you to configure how your BM2022w connects to up to two VoIP
service providers’ network and makes calls over the Internet.
Anonymous
Id
Enter your anonymous ID.
Note: Some modes may not require this.
Ignore Cert
Verification
Select this to ignore base station certification verification when a certificate is
received during EAP-TLS or EAP-TTLS.
Server Root
CA Cert. File
Browse for and choose a server root certificate file, if required.
Server Root
CA Cert. Info
This field displays information about the assigned server root certificate.
Device Cert.
File
Browse for and choose a device certificate file, if required.
Before you import certificate from WebGUI, the certificate file must be signed by
chipset vendor due to security reason.
Device Cert.
Info.
This field displays information about the assigned device certificate.
Device
Private Key
Browse for and choose a device private key, if required.
Device
Private Key
Info
This field displays information about the assigned device private key.
Device
Private Key
Password
Enter the device private key, if required.
Inner Mode Select an inner authentication mode (MS-CHAP, MS-CHAPV2, CHAP, MD5, PAP).
See
Table 15 on page 78 if you need more information.
Username Enter your authentication username.
Password Enter your authentication password.
Back Click to display the previous screen.
Next Click to proceed to the next screen.
Table 8 Setup Wizard > WiMAX Authentication Settings (continued)
LABEL DESCRIPTION