User's Manual Part 1

Chapter 3 Setup Wizard
BM2022w User’s Guide
29
3.1.2 LAN Settings
The LAN Settings screen allows you to configure your local network options.
Figure 10 Setup Wizard > LAN Settings
The following table describes the labels in this screen.
Table 6 Setup Wizard > LAN Settings
LABEL DESCRIPTION
LAN TCP/IP
IP Address Enter the IP address of the BM2022w on the LAN.
Note: This field is the IP address you use to access the BM2022w on the LAN. If the
web configurator is running on a computer on the LAN, you lose access to it as
soon as you change this field. You can access the web configurator again by
typing the new IP address in the browser.
IP Subnet
Mask
Enter the subnet mask of the LAN.
DHCP Server
Enable Select this if you want the BM2022w to be the DHCP server on the LAN. As a DHCP
server, the BM2022w assigns IP addresses to DHCP clients on the LAN and provides
the subnet mask and DNS server information.
Start IP Enter the IP address from which the BM2022w begins allocating IP addresses.
End IP Enter the IP address at which the BM2022w stops allocating IP addresses.
Lease
Time
Enter the duration in minutes before the device requests a new IP address from the
DHCP server.