User's Manual Part 1

Chapter 7 Network Setting
BM2022w User’s Guide
109
Click Add in the Network Setting > Route > Static Route screen to open this screen as shown
next.
Figure 55 Static Route Screen
This screen contains the following fields:
7.13 RIP
Use these settings to configure how the WiMAX Device exchanges information with other routers.
Table 38 Static Route
LABEL DESCRIPTION
Destination IP Enter the destination IP address of the static route.
Subnet Mask Enter the subnet mask of the static route.
Next Hop Select Interface and then select WAN or LAN for the next hop of the static
route.
If the next hop is an IP address rather than an interface on the BM2022w, select
IP Address and enter the IP address.
Metric Enter the static route metric.