User's Manual Part 1

Chapter 7 Network Setting
BM2022w User’s Guide
108
7.11 Static Route
Use these settings to create fixed paths through the network.
Click Network Setting > Route > Static Route to open this screen as shown next.
Figure 54 Static Route Screen
This screen contains the following fields:
7.12 Static Route Add
Use these settings to configure a static route.
Name Type the name of the device. The name can be up to 20 characters long, and any
combination of letters, numbers or symbols.
MAC Address
Enter the MAC addresses of the wireless devices that are allowed or
denied access to the BM2022w in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal
character pairs, for example, 12:34:56:78:9a:bc.
Delete Click to delete a specific MAC address from the list.
Add Click to add a MAC address to the list.
OK Click this button when you are done adding a MAC Address.
Table 36 MAC Address Filter
LABEL DESCRIPTION
Table 37 Static Route
LABEL DESCRIPTION
Destination This field displays the destination IP address of the static route.
Subnet Mask This field displays the subnet mask of the static route.
Next Hop This field displays next hop information of the static route.
Metric This field displays the static route metric.
Add Click this to add a new static route to the list.