User's Manual

Chapter 7 Network Setting
BM2022 Users Guide
101
7.9 Static Route Add
Use these settings to configure a static route.
Click Add in the Network Setting > Route > Static Route screen to open this screen as shown
next.
Figure 43 Static Route Screen
This screen contains the following fields:
7.10 RIP
Use these settings to configure how the WiMAX Device exchanges information with other routers.
Metric This field displays the static route metric.
Add Click this to add a new static route to the list.
Table 31 Static Route (continued)
LABEL DESCRIPTION
Table 32 Static Route
LABEL DESCRIPTION
Destination IP Enter the destination IP address of the static route.
Subnet Mask Enter the subnet mask of the static route.
Next Hop Select Interface and then select WAN or LAN for the next hop of the static
route.
If the next hop is an IP address rather than an interface on the BM2022, select
IP Address and enter the IP address.
Metric Enter the static route metric.