User's Manual

Chapter 7 Network Setting
BM2022 Users Guide
98
This screen contains the following fields:
7.5 EtherIP
Use these settings to configure the peer setting of the EtherIP tunnel between the WiMAX Device
and another EtherIP peer.
Click Network Setting > WAN > EtherIP to open this screen as shown next.
Figure 39 EtherIP Screen
This screen contains the following fields:
7.6 IP
Use these settings to configure the LAN connection between the WiMAX Device and your local
network.
Click Network Setting > LAN > IP to open this screen as shown next.
Figure 40 IP Screen
This screen contains the following fields:
Table 27 GRE
LABEL DESCRIPTION
Peer IP Address Enter the IP address of the GRE peer.
Table 28 EtherIP
LABEL DESCRIPTION
Peer IP Address Enter the IP address of the EtherIP peer.
Table 29 IP
LABEL DESCRIPTION
IP address Enter the IP address of the LAN interface for the BM2022.
IP Subnet Mask Enter the IP subnet mask of the LAN interface for the BM2022.