User's Manual
Chapter 6 WiMAX
BM2022 Users Guide
84
6.10 Wide Scan
This screen allows you to discover base stations by entering one or more frequency ranges and
bandwidth on which to scan.
Device Status This field displays the BM2022 current status for connecting to the selected base
station.
Scanning - The BM2022 is scanning for available base stations.
Ready - The BM2022 has finished scanning and you can connect to a base
station.
Connecting - The BM2022 attempts to connect to the selected base station.
Connected - The BM2022 has successfully connected to the selected base
station.
UMAC State This field displays the status of the WiMAX connection between the BM2022 and
the base station.
Network Search - The BM2022 is scanning for any available WiMAX
connections.
Disconnected - No WiMAX connection is available.
Network Entry - A WiMAX connection is initializing.
Normal - The WiMAX connection has been successfully established.
BSID This field displays the MAC address of the base station to which the BM2022 is
connected.
Frequency
(MHz)
This field displays the frequency the base station uses in megahertz (MHz).
RSSI (dBm) This field displays the Received Signal Strength Indication (RSSI), which is an
overall measurement of radio signal strength. A higher RSSI level indicates a
stronger signal.
CINR (dB) This field displays the average Carrier to Interference plus Noise Ratio for the
current connection. This value is an indication of overall radio signal quality,
where a higher value means a better quality signal.
Connected NSP Info
NSP ID This field displays the NSP ID of the connected NSP.
Name This field displays the name of the connected NSP.
Network Type This field displays the network type of the connected NSP.
Table 19 Connect (continued)
LABEL DESCRIPTION