User's Manual

Chapter 6 WiMAX
BM2022 Users Guide
72
6.4 Authentication Settings
These settings allow the WiMAX Device to establish a secure (authenticated) connection with the
service provider.
Delete Click this button to remove an item from the list.
Add Click this button to add an item to the list.
OK Click this button to save any changes made to the list.
A (When By Range is selected in the Setting Type field)
Start
Frequency
(KHz)
This indicates the beginning of a frequency band in kilohertz (KHz).
Click this field to modify it.
Enter the beginning frequency when you are adding an entry.
End
Frequency
(KHz)
This indicates the end of the frequency band in kilohertz (KHz).
Click this field to modify it.
Step (KHz) This indicates the frequency step within each band in kilohertz (KHz).
Click this field to modify it.
Bandwidth
(MHz)
This indicates the bandwidth in megahertz (MHz).
Click this field to modify it.
OK Click this button to save any changes made to the list.
Valid Band Info (B)
This table displays the entire frequency band the BM2022 supports. The frequenc(ies) to scan that
you configured in table A must be within this range.
Band Start
(KHz)
This indicates the beginning of the frequency band in kilohertz (KHz).
Band End
(KHz)
This indicates the end of the frequency band in kilohertz (KHz).
Table 12 Frequency Settings (continued)
LABEL DESCRIPTION