User's Manual

Chapter 5 System Status
BM2022 Users Guide
62
The following tables describe the labels in this screen.
Table 10 Status
LABEL DESCRIPTION
System Information
System Model
Name
This field displays the BM2022 system model name. It is used for identification.
Software
Version
This field displays the Web Configurator version number.
CROM Version This field displays the CROM version number.
Firmware
Version
This field displays the current version of the firmware inside the device.
Firmware Date This field shows the date the firmware version was created.
System Time This field displays the current system time.
Uptime This field displays how long the BM2022 has been running since it last started
up.
System Resources
Memory This field displays what percentage of the BM2022s memory is currently used.
The higher the memory usage, the more likely the BM2022 is to slow down.
Some memory is required just to start the BM2022 and to run the web
configurator. You can reduce the memory usage by disabling some services; by
reducing the amount of memory allocated to NAT and firewall rules (you may
have to reduce the number of NAT rules or firewall rules to do so); or by
deleting rules in functions such as incoming call policies, speed dial entries, and
static routes.
CPU This field displays what percentage of the BM2022s CPU is currently used. The
higher the CPU usage, the more likely the BM2022 is to slow down.
WiMAX
Device Status This field displays the BM2022 current status for connecting to the selected
base station.
Scanning - The BM2022 is scanning for available base stations.
Ready - The BM2022 has finished a scanning and you can connect to a base
station.
Connecting - The BM2022 attempts to connect to the selected base station.
Connected - The BM2022 has successfully connected to the selected base
station.
Connection
Status
This field displays the status of the WiMAX connection between the BM2022 and
the base station.
Network Search - The BM2022 is scanning for any available WiMAX
connections.
Disconnected - No WiMAX connection is available.
Network Entry - A WiMAX connection is initializing.
Normal - The WiMAX connection has successfully established.
BSID This field displays the MAC address of the base station to which the device is
connected.
Frequency This field indicates the frequency the BM2022 is using.
Signal Strength This field indicates the strength of the connection that the BM2022 has with the
base station.
Link Quality This field indicates the relative quality of the link the BM2022 has with the base
station.