User's Manual
Chapter 4 Tutorials
BM2022 Users Guide
52
2 Next, configure the Name, VID and Ports for the Filter Setting. Interfaces LAN1 and WiMAX
are Trunk links, so the BM2022 will recognize VLAN 5 and VLAN 10 tagged packets it receives on
these interfaces from the VLAN supporting switches. VLAN tagged packets will also be forwarded
out of these interfaces. Interface IAD is configured as an Access port, so tagged packets will be
untagged when they are forwarded.
4.11.3 Scenario 3
In this scenario, PC A and PC C are on VLAN 5, PC B and PC D are on VLAN 10, and PC E is on VLAN
3. PC A and PC B are connected to interface LAN1 through VLAN supporting switch S1. PC C and
PC D are connected to interface WiMAX through VLAN supporting switch S2. PC E is connected to
interface IAD through VLAN supporting switch S2 for managing the BM2022.
Note: You will need to configure the VLAN supporting switches to tag the received packets
with the appropriate VLAN IDs. For example, packets received on switch S1 from
PC A on the LAN would be tagged to VLAN 5.