User's Manual

Chapter 4 Tutorials
BM2022 Users Guide
49
Click Network Setting > WAN. Change the BM2022 to bridge mode and then click Save. If you
cannot obtain IP address settings from a WAN DHCP server, select User as the Get IP Method and
enter the WAN IP Address, WAN IP Subnet Mask and Gateway IP Address.
4.11.1 Scenario 1
In this scenario, PC A is connected directly to interface LAN1 on the BM2022. PC B is connected to
interface WiMAX and interface IAD for managing the BM2022.
A
B
No VLAN Tag
No VLAN Tag
No VLAN Tag
CPE
LAN
Manager IP
No VLAN Tag
No VLAN Tag
No VLAN Tag
User Network
PC
Manager IP: No VLAN Tag
LAN: Transparent
Network
operators
Transparent