User's Manual

Chapter 4 Tutorials
BM2022 Users Guide
48
1 Open the Maintenance > Remote MGMT > HTTP screen.
2 Select Enable in both HTTP Server and HTTPS Server sections and leave the Port Number
settings as 80 and 443.
3 Select Allow Connection from WAN. This allows remote management connections not only from
the local network but also the WAN network (Internet).
4 Click Save.
4.11 VLAN Configuration Examples
This section shows VLAN configuration scenarios.
See Section 7.17 on page 115 if you need more information about VLAN.
Before enabling VLANs you will need to change the BM2022 to bridge mode.