User's Manual

Chapter 4 Tutorials
BM2022 User๎˜‚s Guide
47
To configure a static route to route traffic from N1 to N2:
1 Click Network Setting > Route > Static Route.
2 Click Add to create a new route.
3 Configure the Edit Static Route screen using the following settings:
3a Enter 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
3b Enter 192.168.1.253 (R๎˜ƒs IP address on N1) in the IP Address field under Next Hop.
3a Click Save.
Now computer B should be able to receive traffic from computer A. You may need to additionally
configure R๎˜ƒs firewall settings to accept specific traffic to pass through.
4.10 Remotely Managing Your BM2022
The remote management feature allows you to log into the device through the Internet.
Goal: Set up the BM2022 to allow management requests from the WAN (Internet).
See Also: Section 12.3 on page 177.