User's Manual

Chapter 13 Troubleshooting
BM2022 Users Guide
197
13.4 Reset the BM2022 to Its Factory Defaults
If you reset the BM2022, you lose all of the changes you have made. The BM2022 re-loads its
default settings, and the password resets to 1234. You have to make all of your changes again.
You will lose all of your changes when you push the Reset button.
To reset the BM2022,
1 Make sure the Power LED is on and not blinking.
2 Press and hold the Reset button for five to ten seconds. Release the Reset button when the
Power LED begins to blink. The default settings have been restored.
If the BM2022 restarts automatically, wait for the BM2022 to finish restarting, and log in to the web
configurator. The password is 1234.
If the BM2022 does not restart automatically, disconnect and reconnect the BM2022s power. Then,
follow the directions above again.
13.4.1 Pop-up Windows, JavaScript and Java Permissions
Please see Appendix C on page 233.