User's Manual

Chapter 12 Maintenance
BM2022 Users Guide
180
Click Maintenance > Remote MGMT > CWMP to open this screen as shown next.
Figure 100 CWMP Screen
This screen contains the following fields:
Table 82 CWMP
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
ACS Server URL Enter the URL or IP address of the auto-configuration server.
Bootstrap Enable Select this to enable bootstrap events.
ACS Username
Enter the user name sent when the BM2022 connects to the ACS and which is
used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores
but spaces are not allowed.
ACS Password
Enter the password sent when the BM2022 connects to an ACS and which is used
for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores
but spaces are not allowed.
Periodical Inform
Enable
Select this to allow the BM2022 to periodically connect to the ACS and check for
configuration updates.
If you do not enable this feature then the BM2022 can only be updated
automatically when the ACS initiates contact with it and if you selected the
checkbox on this screen.
Periodical Inform
Interval
Enter the time interval (in seconds) at which the BM2022 connects to the auto-
configuration server.
Connection
Request
Username
Enter the connection request user name that the ACS must send to the BM2022
when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores
but spaces are not allowed.
Note: This must be provided by the ACS administrator.