User's Manual

Chapter 12 Maintenance
BM2022 Users Guide
178
Click Maintenance > Remote MGMT > Telnet to open this screen as shown next.
Figure 97 Telnet Screen
This screen contains the following fields:
12.5 SSH
Use this screen to allow remote access to the WiMAX Device from a network connection over SSH.
Click Maintenance > Remote MGMT > SSH to open this screen as shown next.
Figure 98 SSH Screen
This screen contains the following fields:
Table 79 Telnet
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the BM2022. The computer
must use the same port number.
Allow Connection
from WAN
Select this to allow connections using this service that originate on the WAN.
Allow Connection
from LAN
Select this to allow connection using this service that originate on the LAN.
Table 80 SSH
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the BM2022. The computer
must use the same port number.
Allow Connection
from WAN
Select this to allow connections using this service that originate on the WAN.
Allow Connection
from LAN
Select this to allow connection using this service that originate on the LAN.