User's Manual

Chapter 11 The VoIP Line Screens
BM2022 Users Guide
168
11.2 Phone
Click VoIP > Line > Phone to configure phone related settings.
Figure 88 VoIP > Line > Phone
The following table describes the labels in this screen.
11.3 Voice
Click VoIP > Line > Voice to configure voice settings.
Figure 89 VoIP > Line > Voice
The following table describes the labels in this screen.
Table 73 VoIP > Line > Phone
LABEL DESCRIPTION
Phone
Hook Flash Detect
Upper Bound
Enter the number of milliseconds for the upper bound of a quick on-hook and off-
hook cycle in order to recognize a hook flash event.
Hook Flash Detect
Lower Bound
Enter the number of milliseconds for the lower bound of a quick on-hook and off-
hook cycle in order to recognize a hook flash event.
Voice Tx Level
Select the volume level transmitted by the BM2022. -9 is the quietest, and 9 is
the loudest.
Voice Rx Level
Select the volume level transmitted to the BM2022. -9 is the quietest, and 9 is
the loudest.
Table 74 VoIP > Line > Voice
LABEL DESCRIPTION
VAD - Voice Activity Detection
Enable VAD Enable Voice Active Detector (VAD) to have the BM2022 stop transmitting voice
traffic when you are not speaking using the detection method. This reduces the
bandwidth the BM2022 uses.