User's Manual

Chapter 10 The VoIP Account Screens
BM2022 Users Guide
159
10.4 SIP
Click VoIP > Account > SIP to configure SIP settings.
Figure 84 VoIP > Account > SIP
The following table describes the labels in this screen.
Port Number Enter the SIP proxy servers listening port number, if your VoIP service provider
gave you one. Otherwise, keep the default value.
Outbound Server
Outbound
Server
Enter the IP address or domain name of the outbound proxy server provided by
your VoIP service provider. You can use up to 63 printable ASCII characters. If
you choose not to use an outbound proxy server, set this to 0.0.0.0.
Port Number
Enter the outbound proxys listening port number, if your VoIP service provider
gave you one. Otherwise, leave it as the default 5060.
If the outbound proxy is disabled (set to 0.0.0.0), then this port will be ignored.
Table 67 VoIP > Account > Server
LABEL DESCRIPTION
Table 68 VoIP > Account > SIP
LABEL DESCRIPTION
SIP Account
Enable
Select this if you want the BM2022 to use this account. Clear it if you do not
want the BM2022 to use this account.
SIP Local Port
Enter the BM2022s listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
Subscriber
Number
Enter your SIP number. In the full SIP URI, this is the part before the @
symbol. You can use up to 1-31 printable ASCII characters.
Authentication
Name
Type the SIP user name associated with this account for authentication to the
SIP register server.
This field can be 1-31 printable characters (A-Z, a-z, 0-9).