User's Manual

Chapter 7 Network Setting
BM2022 Users Guide
106
7.12.1 Port Trigger Wizard
Use the wizard to create a port trigger rules that will allow the BM2022 to automate port forwarding
and allow computers on local network to provide services that would normally require a fixed
address on the local network.
Click Network Setting > NAT > Port Trigger > Wizard
Figure 48 Port Trigger Wizard Screen
This screen contains the following fields:
Delete Click this to delete a specified rule.
Wizard Click this to open the port trigger wizard.
Add Click this to add a new port trigger rule.
OK Click this to save any changes made to the port trigger list.
Table 36 Port Trigger (continued)
LABEL DESCRIPTION
Table 37 Port Trigger Wizard
LABEL DESCRIPTION
Active Select this to make this port trigger rule active.
Port Trigger Rule Select the type of port trigger rule.
Rule Name Enter a name for the port trigger rule.
Trigger Protocol Select the type of port trigger protocol.
Trigger Start Port Enter the port trigger start port.
Trigger End Port Enter the port trigger end port.
Open Protocol Select the type of open protocol for the port trigger rule.
Open Start Port Select the starting open port for the port trigger rule.
Open End Port Select the ending open port number for the port trigger rule.