User's Manual

Chapter 7 Network Setting
BM2022 Users Guide
104
7.11.1 Port Forwarding Wizard
Use this wizard to set up a port forwarding rule for incoming service requests to the ports on your
local network.
Click Network Setting > NAT > Port Forwarding > Wizard to open this screen as shown next.
Figure 46 Port Forwarding Wizard Screen
This screen contains the following fields:
Server IP This displays the IP address of the server to which packet for the selected port(s)
are forwarded.
Delete Click this to delete a specified rule.
Wizard Click this to open the port forwarding wizard.
Add Click this to add a new port forwarding rule.
OK Click this to save any changes made to the port forwarding list.
Table 34 Port Forwarding (continued)
LABEL DESCRIPTION
Table 35 Port Forwarding Wizard
LABEL DESCRIPTION
Active Select this to make this port forwarding rule active.
Port Forward Rule Select the type of port forwarding rule.
Rule Name Enter a name for the port forwarding rule.
Protocol Select the port forwarding protocol.
Incoming Start
Port
Enter the starting port number for incoming traffic for the port forwarding rule.
Incoming End
Port
Enter the ending port number for incoming traffic for the port forwarding rule.
Forwarding Start
Port
Enter the starting port number for forwarded traffic for the port forwarding rule.
Forwarding End
Port
Enter the ending port number for forwarded traffic for the port forwarding rule.
Server IP Enter the port forwarding server IP address.