User's Manual

6
SETUP & USER GUIDE DWA0100
DWA0100-20170224-0000v0.0
Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
Label
Description
Internet
Lights up to indicate Internet connection status.
▪ Solid GREEN – Internet is connected but no activity.
▪ Flashing GREEN – Data transmission is in progress.
▪ Solid RED – Internet connection failed.
▪ Off – No internet connection.
USB
Lights up to indicate USB device connection status.
▪ Solid GREEN – A device is connected to the USB port.
▪ Blinking GREEN - Negotiation or traffic.
▪ Off – No device connected to the USB port.
Wireless
Press button 1 to 7 seconds to enable or disable WLAN.
Lights up to indicate wireless connection.
▪ Solid GREEN – Wireless connection is established.
▪ Flashing GREEN – Negotiation or data transmission is in progress.
▪ Off – Wireless connection is disabled.
WPS
Press button for more than 8 seconds to enable WPS.
Lights up to indicate the Wi-Fi Protected Setup (WPS) connection status.
▪ Solid GREEN – WPS is active.
▪ Blinking Green : WPS negotiation
▪ RED – WPS registration failed.
▪ Off – WPS is off.