User's Manual

SETUP & USER GUIDE DWA0100

DWA0100-20170224-0000v0.0

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,

extraction and communication of its contents, is not permitted without written authorization from Technicolor.

To Set up Security Settings

1 Click Home Network > Interfaces > WLAN to open the Wireless Access Point page.

2 Click Configure on the upper-right corner of the screen.

3 Under the Security section, check the Broadcast Network Name to enable wireless devices to see the

SSID of your wireless network.

4 On Encryption, select an encryption method:

 Disabled — No encryption.

 Use WEP Encryption — To use WEP encryption.

▪ WEP Key Length — Select the key length.

▪ WEP Encryption Key — Type the desired encryption key. Users need to enter this passkey to

connect to the wireless network.

 Use WPA-PSK Encryption — To use a WPA-PSK encryption for more security.

▪ WPA-PSK Encryption Key — Type the desired passkey. Users need to enter this passkey to

connect to the wireless network.

▪ WPA-PSK Version — Select the WPA-PSK version to use.

5 Click Apply at the bottom of the page to save changes.