User's Manual

44
SETUP & USER GUIDE DWA0100
DWA0100-20170224-0000v0.0
Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
3 Click Apply to save changes.
To Modify the DHCP Pool
1 Click the Edit button of the pool you want to modify. The LAN_Private screen appears.
 Interface — Displays the current network interface.
 Start Address — Type the starting address of the DHCP pool.
 End Address — Type the ending address of the DHCP pool.
 Subnet Mask — Type the subnet mask.
 Gateway — Type the gateway.
 Primary DNS — Type the primary DNS.
 Secondary DNS — Type the secondary DNS.
2 When done, click Apply.
8.2.2 Wireless Access Point
Click Home Network > Interfaces > TNCAP….. to open the Wireless Access Point page.
This page displays the information of your wireless network. To view the advanced settings, click Details
on the upper-right corner of the screen.