User's Manual

SETUP & USER GUIDE DWA0100

DWA0100-20170224-0000v0.0

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,

extraction and communication of its contents, is not permitted without written authorization from Technicolor.

2 Double-click Technicolor.

3 The SMB Mount window appears.

4 Select the device you want to mount and click OK.

5 Double-click the DEVICE icon on your desktop.

7.8.2 Setting up the Technicolor UPnP AV Server

To set up the Technicolor UPnP AV Server, proceed as follows:

1 Under UPnP AV Media Server, click Server Enabled.

2 Click Apply.

7.8.3 Setting up an FTP Server

To set up and FTP Server, proceed as follows:

1 Under FTP Server, click Server Enabled.

2 Under List of connected disks, click the radio button next to the partition that you want to access

using FTP.

3 The Wireless Gateway now creates Media and Shared folders on the selected partition. The Shared

folder will be used as root location for FTP sessions.

4 Click Apply.

As you may know the IP address of your Internet connection may change frequently. This implies

that the link to the FTP server will also change every time the public IP changes. With Dynamic

DNS you can assign a host name to the IP address (for example mygateway.dyndns.org). For more

information, see Dynamic DNS.

Make sure to unmount your device before unplugging it. Unplugging your device without

unmounting it properly first can result in disk corruption. See Unmounting your device for more

information.

7.8.4 Unmounting Your USB Device

To unmount your USB device, proceed as follows:

1 In the Toolbox menu click Content Sharing.

2 Click Configure on the upper right corner of the screen.

3 In the List of connected disks, you can unmount the device you want to unplug by clicking Unmount.