User's Manual

SETUP & USER GUIDE DWA0100

DWA0100-20170224-0000v0.0

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,

extraction and communication of its contents, is not permitted without written authorization from Technicolor.

7.8.1 Setting up a Network File Server

To Set Up a Network file Server

Proceed as follows (for Windows Networking only):

1 Click Configure on the upper right corner of the screen.

2 Under Network File Server (Windows Networking), click Server Enabled. It is also recommended to fill

in the following fields:

 Server Name

 Server Description

 Workgroup

3 Click Apply.

4 All users connected to the Technicolor Gateway can now connect to your USB storage device.

To Access Your Shared USB Devices on Windows

Proceed as follows:

1 Open Windows Explorer.

2 In the address bar type \\Technicolor or 192.168.1.254.

3 All storage devices that are attached to your Technicolor Gateway are listed as folders. If you attached

more than one storage device the folder name will contains an index number (for example device2).

4 If you plan to frequently use this folder, it might be useful to map this folder as a network drive. For

more information, see your operating system's help.

To Access Your Shared USB Devices on Mac

Proceed as follows:

1 On the Go menu, click Network.