User's Manual

SETUP & USER GUIDE DWA0100

DWA0100-20170224-0000v0.0

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,

extraction and communication of its contents, is not permitted without written authorization from Technicolor.

 Allow: To allow access to the web site.

 Redirect: To redirect to another web site if the web site defined on the Web Site field is being

accessed.

▪ Redirect — If Redirect is selected in Action, enter the URL address to where you want to redirect the

site.

▪ Click Add to save the changes to the table.

7.4 Firewall

The Firewall page allows you to set the firewall security of your Wireless Gateway.

To view the Firewall page, do one of the following:

▪ From the Home screen, click Firewall under Toolbox.

▪ On the main menu, click Toolbox > Firewall.

7.4.1 Change Firewall Security Level

1 On the Firewall page, click Configure on the upper-right corner of the screen.

2 Select the desired security level:

 Block All — Block all traffic from and to the Internet.

 Standard — Block all incoming traffic but allow outgoing traffic.

 Disabled — Disable firewall security, all traffic is allowed.

3 Click Apply to save changes.

7.4.2 Create a New Security Level

1 On the Firewall page, click Configure on the upper-right corner of the screen.

2 Click the Create a new Security Level shortcut at the bottom of the screen. The New Firewall Level

screen appears.