User's Manual

SETUP & USER GUIDE DWA0100

DWA0100-20170224-0000v0.0

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,

extraction and communication of its contents, is not permitted without written authorization from Technicolor.

4 Select how you want to define the new game or application:

 Clone Exiting Game or Application — Select an existing game or application to clone its protocol

and TCP/UDP port range settings.

 Manual Entry of Port Maps — To manually select the protocol and enter the port range of the new

game or application.

5 Click Next to continue.

6 If Clone Exiting Game or Application is selected on step 4, skip to step 8.

7 If Manual Entry of Port Maps is selected on step 4, configure the parameters of the Game or

Application Definition table. A preset incoming port range is set by the Wireless Gateway. You may

add, edit, or delete this range. To add a TCP/UDP port range, do the following:

a Select the protocol.

b Enter the incoming port range and the outgoing trigger port.

c Click Add to save the settings.

8 Creating of game or application is complete.

7.2.4 Modify a Game or Application

1 On the main menu, click Toolbox > Game & Application Sharing.

2 From the Game & Application page, click the Modify a game or application shortcut at the bottom of

the screen.

3 The list of games and applications appear. Click the Edit button of the game or application you want to

modify.

4 Modify the necessary information.

5 Click Apply to save changes.