User's Manual

SETUP & USER GUIDE DWA0100

DWA0100-20170224-0000v0.0

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,

extraction and communication of its contents, is not permitted without written authorization from Technicolor.

7 Enter or take note of the wireless security settings.

a Select the type of wireless security to use.

Select WPA2 for the strongest security. Older devices may not be able to connect.

Select WPA+WPA2 to let newer and slightly older devices connect.

Select WPA if you only have devices that support WPA.

Select WEP to use the weakest security if you have to connect old devices that do not support WPA2

or WPA. See “To Set up Security Settings on page 46” for details on the WEP encryption settings.

b Type the Phassphrase (password) users enter to connect to the wireless network and click Next.

8 Configure your user name and password and then click Next.

9 Review your Wireless Gateway settings, and then click Start to apply the settings.