User's Manual

12
SETUP & USER GUIDE DWA0100
DWA0100-20170224-0000v0.0
Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
3.3 Windows 7
If you are using Windows 7, follow the instructions below to configure your computer.
1 Click Start > Control Panel > Network & Sharing Center.
2 Click Local Area Connection.
3 Click Properties.
4 On the network components list, make sure that Internet
Protocol (TCP/IP) is checked. If not, check it to enable the
Properties button.
5 Select Internet Protocol (TCP/IP), and then click
Properties.
6 On the General tab, select Obtain an IP Address
automatically and Obtain DNS server address automatically.
7 Click OK.
General Page
3.4 Windows 8
If you are using Windows 8, follow the instructions below to configure your computer.
1 On a PC, move the cursor to the bottom or top right corner
of the screen and click Settings. On a tablet, swipe left from
the right side of the screen and tap Settings.
2 Click Control Panel.
3 Change the display style from Category to Large icons or
Small icons.
4 Click Network and Sharing Center.
5 Click Change adapter settings.
6 Right click the Ethernet connection click Properties.
7 On the network components list, make sure that Internet
Protocol Version 4 (TCP/IPv4) is checked. If not, check it
to enable the Properties button.
8 Select Internet Protocol Version 4 (TCP/IPv4), and then
click Properties.
9 On the General tab, select Obtain an IP address
automatically and Obtain DNS server address
automatically.
10 Click OK.
General Page