User's Manual

11
SETUP & USER GUIDE DWA0100
DWA0100-20170224-0000v0.0
Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
3 Configure the Computer
This chapter will guide you on how to configure your computer according to the operating system you are
using.
▪ Windows XP, see below.
▪ Windows Vista, see page 11.
▪ Windows 7, see page 12.
▪ Windows 8, see page 12.
3.1 Windows XP
If you are using Windows

XP, follow the instructions below to configure your computer.
1 Click Start > Control Panel > Network Connections.
2 Right-click Local Area Connection, then click Properties.
3 On the network components list, make sure that Internet
Protocol (TCP/IP) is checked. If not, check it to enable the
Properties button.
4 Select Internet Protocol (TCP/IP), and then click
Properties.
5 On the General tab, select Obtain an IP Address
automatically and Obtain DNS server address
automatically.
6 Click OK.
General Page
3.2 Windows Vista
If you are using Windows

Vista, follow the instructions below to configure your computer.
1 Click Start > Control Panel > Network and Internet
Connections > Network Connections.
2 Right-click Local Area Connection, then click Properties.
3 On the General tab, make sure that Internet Protocol
(TCP/IP) is checked. If not, check it to enable the
Properties button.
4 Select Internet Protocol (TCP/IP), and then click
Properties.
5 Select Obtain an IP Address automatically and Obtain
DNS server address automatically.
6 Click OK.
General Page